Rogue Loadable Kettlebell

★★★★★
★★★★★
3.8
20 reviews
Gemaakt in de VS

Rogue Loadable Kettlebell

★★★★★
★★★★★
3.8
20 reviews
Gemaakt in de VS
€ 93,17
Excl. btw
€ 77,00
Wordt verzonden vanuit de VS
Wordt binnen 6-8 weken verzonden
Includes Handle, Base, and Wire Lock Pin

Productspecificaties

MerkRogue Fitness
Gemaakt in de VSJa
Gewicht10,25 LB (complete set) / 2,75 LB (alleen basis)
Breedte7,5" (handgreep), 3,75" (basis)
Hoogte12.25" - 16.25"
StaalgegevensMassieve handgreep met een diameter van 1,25"
Andere kenmerkenBlank staal
Lengte schijfopname6"
Productbeschrijving

Belangrijk: Omdat de Rogue Loadable Kettlebell is gemaakt van onbewerkt/blank staal, heeft hij mogelijk wat extra onderhoud nodig. Je kunt het materiaal een mooie patina-look geven door het af en toe op te poetsen met 3-in-One olie of WD-40.

Meer lezen

Belangrijk: Omdat de Rogue Loadable Kettlebell is gemaakt van onbewerkt/blank staal, heeft hij mogelijk wat extra onderhoud nodig. Je kunt het materiaal een mooie patina-look geven door het af en toe op te poetsen met 3-in-One olie of WD-40.

Rogue Loadable Kettlebell

De Rogue Loadable Kettlebell wordt in de VS gemaakt van massief staal met een diameter van 1,25". Deze kettlebell is geschikt voor vrijwel alle standaard Olympische schijven van 2", evenals onze Rogue Dumbbell Bumpers. De halter is net zo veelzijdig als een heel rek traditionele kettlebells, maar dan in een eenvoudig, draagbaar ontwerp van 10,25 LB.

De kettlebell wordt meegeleverd met een vergrendelingspin om de handgreep veilig aan de basis te bevestigen, die een laadbare lengte heeft van 6". Dezelfde basis kan ook in een Atlassteen worden gestoken, waardoor de handgreep kan worden gebruikt om stenen of aangepaste betonnen kettlebells te heffen. Je kunt de basisstang hierom ook à la carte bestellen als je meerdere stenen/betonnen kettlebells hebt en slechts één handgreep nodig hebt.

Elke Loadable Kettlebell wordt met de hand gesmeed door Lockhart Ironworks en met de hand voorzien van het Rogue-logo. Gebruikers kunnen apart een assluiting bestellen om schijven op de stang vast te zetten voor een beter gevoel tijdens gebruik.

Bestelopties:

Loadable Kettlebell - complete kit:

  • 1 handgreep
  • 1 basis
  • 1 vergrendelingspin

Loadable Kettlebell - Alleen basisstang

  • 1 basis



Productspecificaties

Specificaties:

  • Gemaakt in de VS
  • Constructie van ruw staal
  • Massieve handgreep: 1.25" diameter
  • Breedte: 7.5" (handgreep), 3.75" (basis)
  • Hoogte: 12.25" - 16.25"
  • Gewicht: 10.25 LB (complete kit) / 2.75 LB (alleen de basis)
  • Hoogte belastbare basis: 6"
  • Gepatenteerd

Bekijk meer: belastbare dumbbells van Rogue

Verzenden

Rogue Snelle Verzending

Via het Rogue-verzendsysteem kun je je bestelling volgen vanaf het moment dat je de bestelling plaatst tot aan het moment dat deze wordt bezorgd. Bestel nu en volg je bestelling direct.

Aanbevolen producten

reviews

1 - 8 van 20 reviews
Why is this required
Atlanta
★★★★★
★★★★★
3 weeks ago
Good Concept - Not The Tolerance You'd Expect
The reviews are too far off on this one. The finish isn't terrible and they state is isn't finished before you buy it, so I don't think that is a big deal. If you plan to use these for bottom up presses, just be aware that the sleeve isn't the exact same size as the standard sleeve. it is ever so slightly smaller, so if you flip it over the sleeve clamp will start to slide down. I'd imagine if this had a finish on it, that might make the difference. but if the intent is to sell it unfinished (which is fine) the sleeve should have the correct tolerance for collars to stay in place. Good concept if youre trying to save money or dont have the space for a ton of kettlebells, and works great if you're not flipping it over.
Oorspronkelijk gepost op roguefitness.com

Reactie van Rogue Fitness:

2 weeks ago
Thank you for your feedback on the Loadable Kettlebell. This is designed to be used with axle collars that have a smaller diameter. An axle collar will keep the plates in place.
Hughes
Levittown Pa
★★★★★
★★★★★
February 13
Good for home gym
Well made. Easy to use. One downside. If want to go heavier. The metal sleeve is not long enough. Have to use bigger plates. Depending on what exercise you’re doing. May have an awkward stance. All in all. Works well.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
Mark L S
★★★★★
★★★★★
January 13
Standard OSO Collar Doesn't Fit
Without a collar, metal plates will clank around and that is undesirable. Despite what you see in the pictures, an OSO collar does not fit on this kettlebell. Yet, there is a work-around. Wrap a layer or two of packing tape around the shaft and then the collar can do its job. If the shaft was same width as the sleeves of a typical barbell I would give this product 5 stars.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com

Reactie van Rogue Fitness:

January 19
Thank you for this feedback of the Loadable Kettlebell. The collar you see in the picture is one of our Axle Collars for smaller, specialty bars: https://www.roguefitness.com/oso-axle-collars-red
Mad house
Charlotte
★★★★★
★★★★★
May 2023
loadable kettle bell must have
This is a must have for your gym. The quality and durable is hands down the best you will find.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
BRdz
Florida
★★★★★
★★★★★
May 2023
Great Built
I love this loadable kettlebell. It has a great feel, it's heavy duty and the handle has a nice raw steel. I would recommend this item and I'm very pleased I bought it.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
Jhannay
Dallas
★★★★★
★★★★★
Mar 2023
Great idea, needs more work
The idea is useful, but this particular version is flawed. The attachment needs to be longer to allow more weight to be added. It’s just too short. The T-bell version does this better.
Oorspronkelijk gepost op roguefitness.com
Alessandro
Italy
★★★★★
★★★★★
Feb 2023
Bad design and rough product
The product has a good amount of problems: 1) the handle doesn’t resemble a kettlebell handle. 2) the sleeve isn’t a true 1 inch tube and collars don’t work on it. This means that the plates slide up and down during use. 3) the diameter of the handle is a lot smaller that the loadable sleeve and makes a big gap between the 2. During use you can feel a good amount of slack between the 2. In addition to this problem mine is pretty rough and unfinished. The product is not even sanded and it’s full of welding spatters, sharp edges and the holes aren’t clean.
Nuttig?
Ja · 3
Nee · 0

Reactie van Rogue Fitness:

Feb 2023
Thank you for your feedback and we're sorry to hear of any issues with your Loadable Kettlebell. Our team has taken a look and are getting a replacement on order for you.
Terdzor
NJ
★★★★★
★★★★★
Dec 2022
Very, very not bad
This thing does all that it should and I would fully recommend it to a friend. The only caveat is that it has no finish which means, because I have an "outdoor" workout space, I have to actively manage oxidation. That said, I would buy again but it could be improved.
Ja, ik beveel dit product aan
Oorspronkelijk gepost op roguefitness.com
#RYOUROGUETag je foto's op Instagram en Twitter met #RYOUROGUE... dan word jij misschien opgenomen in onze galerijBekijk volledige galerij