Daily Shipping Deals




Rogue 3 Bar Gun Rack™

3 Bar Gun Rack™ with Plastic
€57.00 €68.97 Incl. Tax
Includes (2) UHMW Plastic Inserts with Hardware, and (2) Gun Rack Brackets
3 Bar Gun Rack™
€43.00 €52.03 Incl. Tax
Plastic not included.
3 Bar Gun Rack™ Plastic Kit
€32.00 €38.72 Incl. Tax
Includes (2) Plastic Inserts and connecting hardware. Gun Rack Brackets Not Included.

3 Bar Gun Rack™

Rogue’s 3 Bar Gun Rack™ mounts easily to any solid wall (concrete, cinder block, wood, etc), offering a simple solution for barbell storage and protection. A compact, half-size version of our V2 Gun Rack™, this horizontal bar holder is built in the USA using precision-cut, 7-gauge steel brackets. The rack’s unique rung design allows it to safely support either the sleeve or shaft of any standard barbell. Optional UHMW plastic liners can also be added to further protect the knurling of your bars from scuffing and other damage.

The 3 Bar Gun Rack™ is available to order as a single unit with a 3-bar storage capacity. Any order that includes plastic inserts will also include the required hardware for joining the inserts to the rack. Wall-mounting hardware for the rack itself, however, is not included.

IMPORTANT: In order to better protect the finish and steel of your barbell, the width of the brackets should be set to catch the shaft only when plastic is in use. Without plastic, we recommend setting the brackets wide enough to hold the sleeves.

Please Note: The Rogue 3 Bar Gun Rack™ does NOT come with hardware. The mounting holes are 3/8" in diameter, so we recommend 5/16" diameter hardware.


  • Made in America
  • 7-gauge steel brackets
  • Bracket Length: 17” (43 cm)
  • Length from wall to edge of bracket: 5” (13 cm)
  • DIameter of Mounting Holes: 3/8" (mounting hardware not included)
  • Single unit Barbell Rack holds 3 bars
  • Optional UHMW Plastic Inserts available with hardware for attachment

Note: This rack is designed for horizontal bar storage only. See more of Rogue’s Plate and Barbell Storage Options here.

Gear Specs

Brand Rogue Fitness
Made In USA Yes
Length 17"
Width 1.75"
Height 5" (Depth)
Steel Notes 7 Gauge Steel
Storage Bar Storage
Rogue 3 Bar Gun Rack™ is rated 4.8 out of 5 by 18.
Rated 5 out of 5 by from Perfect! The rack is great, looks fantastic on my wall, and I do recommend the plastic inserts, as it appears it protects from possible scuffs the rack can leave on the bar if you do not have it (I have a beautiful cerakote power bar). I do not think that would be an issue with a stainless steel bar.
Date published: 2019-08-28
Rated 5 out of 5 by from Rogue everything! Rogue is the best. We are very happy with tour home set up.
Date published: 2019-08-27
Rated 5 out of 5 by from Looks great! I bought this rack about a month ago. It was easy to install and works great to keep our bars up off the floor.
Date published: 2019-06-30
Rated 5 out of 5 by from Another great rogue product! Installed easily. Picked up 3"×1/2" lags, located studs with Franklin sensors, 2' mag level to mark holes, predrilled holes, impact drilled & done. Thx Rogue
Date published: 2019-04-29
Rated 5 out of 5 by from Perfect for my needs Solid and well built for my needs. I bought 2 of these instead of the 6-bar one so that I could separate them a bit and fit a PowerBlock curl bar too. My lever arm handles hang from the bottom as well.
Date published: 2019-03-26
Rated 4 out of 5 by from Great piece Overall, this is an excellent, well constructed rack. Looks nice, easy to install and functional. Make sure it’s installed in studs or solid wall, between the general weight and bar being put into the rack, they take a beating. I only gave them 4 stars as I wish the secondary plastic pieces were included to make the complete package. However, installing the rack 4’ wide, bars don’t contact the rack plates anywhere where they will be damaged, or banged up, or at least not where it is an issue. Very pleased overall.
Date published: 2019-03-04
Rated 5 out of 5 by from Great Bar Rack Just installed this rack and it looks great. However, I had to mount this on a concrete wall in the basement. As per the instructions, I used 3.5" wall anchors (not included in the packaging). This was the first time I installed them, so I'll share what I learned. To install the wall anchors (which are long bolts with a wedge assembly on one end), you need to drill a hole and then tap them in with a hammer. Make sure the hole is less than the full 3.5" so some thread is left when they are fully inserted (I went 3" deep). Be very careful when tapping them in. It's very easy to either ruin the threads at the tip of the bolt or bend the bolt itself if you apply too much force. Be patient. After I screwed up the first one, I screwed on two nuts to protect the threads before I started hammering. Even so, I messed up the threads on the fourth bolt and had to fix up the thread with a die. Maybe someone else knows a better technique for this ...
Date published: 2018-12-31
Rated 5 out of 5 by from Great look and a must have for oly bars Love the way it looks in my garage. I have a couple oly bars and wanted to make sure I store them properly so invested in the gun with plastic insert. It was very easy to install. Having the bars horizontal helps with cleaning as well.
Date published: 2018-09-19
  • y_2019, m_10, d_13, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_EU-3GUN, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rogueeurope