Rogue 20KG Ohio Power Bar - Stainless Steel
Rogue 20KG Ohio Power Bar - Stainless Steel
Descripción del producto
The Rogue 20KG Ohio Power Bar is fully machined and assembled in Columbus, OH, using 200K PSI tensile strength steel. Approved for competition by the International Powerlifting Federation, this 29MM diameter bar includes single powerlifting knurl marks and a center knurl, with the same deep, coarse (but not overly sharp) knurl pattern as our 45LB Ohio Power Bar. The 20KG bar does have a greater loadable sleeve length than the 45LB bar (16.875” vs. 16.25”). This is a result of the slightly smaller width of the collars.
Leer más
Rogue 20 KG Ohio Power Bar - Stainless Steel
The Rogue 20KG Ohio Power Bar is fully machined and assembled in Columbus, OH, using 200K PSI tensile strength steel. Approved for competition by the International Powerlifting Federation, this 29MM diameter bar includes single powerlifting knurl marks and a center knurl, with the same deep, coarse (but not overly sharp) knurl pattern as our 45LB Ohio Power Bar. The 20KG bar does have a greater loadable sleeve length than the 45LB bar (16.875” vs. 16.25”). This is a result of the slightly smaller width of the collars.
One of the key factors that sets the 20KG Ohio Power Bar apart from other powerlifting barbells in the industry is its friction welded sleeves. A technique borrowed from the worlds of aviation and automotive manufacturing, the friction welding process creates a precision, forged-quality bond, resulting in superior strength and fatigue resistance, as well as a finer grain structure on the welded joint.
The 20KG Rogue Ohio Power Bar includes bronze bushings, a snap ring design, and a Stainless Steel shaft with Chrome sleeves.
Note on Stainless Steel: Barbells made from raw steel are not plated and therefore marks from the machining process may be visible.
Especificaciones del producto
Especificaciones:
- Fabricado en EE. UU.
- Weight 20KG (+/- 0.1% of actual weight)
- More aggressive knurling for powerlifting
- Center knurl for added “stick” to the back during squats
- 29MM Diameter and 200,000 PSI tensile strength for greater rigidity and reduced whip/flex
- Bronze Bushings and Snap Ring Design for smooth spin
- Friction Welded Sleeves
- Finish: Stainless Shaft w/ Chrome Sleeves
- F10-R Rating
- Lifetime Warranty against bending*
- Aprobado por la IPF (Federación Internacional de Levantamiento de potencia)
Envío
Envío rápido de Rogue
El Sistema de envíos de Rogue te permite realizar un seguimiento de tu pedido desde el momento en que lo pides hasta que llega a tu puerta. Haz tu pedido hoy y comienza hoy su seguimiento.
Especificaciones del producto | |
Marca | Rogue Fitness |
Garantía | Garantía de por vida* |
Fabricado en EE. UU. | Sí |
Longitud de carga de la manga | 16.875" |
Longitud de la barra | 86.52" |
Distancia entre mangas | 51.5" |
Diámetro | 29MM |
F Rating™ | F10-R |
Tipo de barra | Barras para hombre |
Uso de la barra | Powerlifting (Levantamiento de potencia) |
Cojinete/Rodamiento | Cojinete |
Peso de la barra | 20KG |
Moleteado | Powerlifting (Levantamiento de potencia) |
Moleteado central | Sí |
Marca de moleteado | Powerlifting (Levantamiento de potencia) |
Revestimiento del eje | Acero Inoxidable |
Revestimiento de la manga | Cromado |
Resistencia a la tracción | 200.000 PSI |
KEY FEATURES OF THE ROGUE 20KG OHIO POWER BAR
200,000 PSI Steel (200,000 PSI for Stainless)
The Ohio Power Bar’s 29MM diameter steel shaft boasts a tensile strength of 200,000 PSI, delivering superior rigidity and virtually zero whip/flex. Machined and assembled in Columbus, Ohio, the bar also features a snap-ring design and quality bronze bushings for a smooth, consistent feel. IPF approved for competition.
Aggressive Knurl
The bar includes single powerlifting marks and a center knurl, each featuring a deep, coarse pattern that produces a reliable grip / stick without being sharp or abrasive. Perfecting this knurl pattern is both a science and an art. Every bar shaft is machined in Columbus on new Haas machines (built in the USA) and fine-tuned and personally tested by the Rogue team.
Friction Welded Sleeves
A technique borrowed from the worlds of aviation and automotive manufacturing, the friction welding process creates a precision, forged-quality bond, resulting in superior strength and fatigue resistance, as well as a finer grain structure on the welded joint.
Use It With These Other Rogue Products
Ohio Power Bar owners can use this barbell in conjunction with a broad range of other top caliber Rogue powerlifting products, from the Westside Bench and R-3 Power Rack to deadlift bar jacks, Wagon Wheel plates, and Calibrated Steel Plates.
Two Finish Options
The 20KG version of the Ohio Power Bar is available in your choice of two quality finishes. The Black Zinc option (black shaft, bright sleeves) provides excellent corrosion resistance, while the new Stainless Steel variation (with Chrome sleeves) creates the look and natural feel of bare steel with less upkeep required.
F SCALE™
The F Scale™ is a durability scale for barbells based on functional testing at stresses similar to what barbells experience when being dropped from overhead. Bars that have been treated with Rogue Work Hardening (RWH™) are designated by having an R in their F Rating™. For more information on F Scale™ click here.
OXIDATION RATE
La resistencia de una barra a la oxidación depende del tipo de acero y del revestimiento. Las barras en el extremo inferior del espectro requerirán más cuidado y mantenimiento para preservar su apariencia que las barras en el extremo superior del espectro.
*La garantía contra la deformación no cubre ninguna barra que haya sido dañada debido a un uso, alteración, mantenimiento, almacenamiento o manejo negligente o inadecuado por parte del usuario. El uso negligente o inadecuado incluye soltar la barra de manera excesiva (por ejemplo, soltar la barra sobre una caja, banca, brazos o soportes del rack, soltarla de manera excesiva con bumpers insuficientes o dañados, o soltarla de manera excesiva con discos de hierro, así como otros usos similares). Cualquier problema específico respecto a un producto de Rogue con el que el cliente no se encuentre satisfecho se revisará caso por caso. Hemos descubierto que la mayoría de los problemas con las barras que reemplazamos tienen relación con un uso abusivo, y no son debidos a la fabricación o materiales.